[ใหม่] dbx 1046V
21,900 ฿
รายละเอียด
ราคา : 42700
โปรโมชั่น : 21,900.00 บาท
NPUT
Connectors:XLR and 1/4" TRS (Pin 2 and tip hot)
Type:>Electronically balanced/unbalanced, RF filtered
Impedance:>Balanced > 40 kOhm, unbalanced >20 kOhm
Max Input Level:>> +22 dBu balanced or unbalanced
CMRR:>Typically >50 dB at 1 kHz
OUTPUTConnectors:>XLR and 1/4" TRS (Pin 2 and tip hot)
Type:>Servo-balanced/unbalanced, RF filtered
Impedance:>Balanced 30 Ohm, unbalanced 15 Ohm
Max Output Level:>> +22 dBm balanced, > +20 dBm unbalanced
SYSTEM PERFORMANCE
Bandwidth:>20 Hz to 20 kHz, +0/-0.5 dB
Frequency Response:>0.35 Hz to 90kHz, +0/-3 dB
Noise:>< -96 dBu, unweighted, 22 kHz measurement bandwidth
Dynamic Range:>> 118 dB, unweighted
THD+Noise:>0.008% typical at +4 dBu, 1 kHz unity gain
0.08% typical at +20 dBu, 1 kHz, unity gain
< 0.1% any amount of compression up to 40 dB, 1 kHz
IMD:>< 0.1% SMPTE
Interchannel
Crosstalk:< -80 dB 20Hz to 20 kHz
Stereo Coupling:>True RMS Power Summing
COMPRESSOR
Threshold Range:>-40 dBu to +20 dBu
Ratio:>1:1 to infinity:1
Threshold
Characteristic:Selectable OverEasy® or hard knee
Attack/Release
Characteristic:AutoDynamic™
Attack Time:>Program-dependent
Release Time:>Program-dependent
Output Gain:>-20 to +20 dB
LIMITER
Threshold Range:>0 dBu to +24 dBu (off)
Ratio:>infinity: 1
Limiter Type:>PeakStopPlus® two-stage limiter
Stage 1:>PeakStop® brickwall limiter
Attack Time:>Zero
Release Time:>Zero
Stage 2:>Predictive intelligent program limiter
Attack Time:>Program-dependent
Release Time:>Program-dependent
FUNCTION SWITCHES
OverEasy®:>Activates the OverEasy compression function.
I/O Meter:>Switches between monitoring input and output levels on the Input/Output Level meter.
Bypass:>Activates the direct input-to-output hard-wire bypass.
OPERATING LEVEL
(rear panel):>Switches the nominal operating level between -10 dBV and +4 dBu simultaneously for both input and output levels.
ST Link:>Links channels in stereo pairs. Channels One and Three become the master channels.
INDICATORS
Gain Reduction Meter:>8 segment LED bar graph at 1, 3, 6, 10, 15, 20, 25, and 30 dB
Input/Ouptut Meter:>8-segment LED bar graph at -24, -18, -12, -6, 0, +6, +12, and +18 dBu
PeakStop™:>1 LED to indicate PeakStop™ limiting
Function Switches:>LED indicator for each front-panel switch
OPTIONS - Output Transformer
Per Channel:>Jensen® JT-123-dbx or JT- 11-dbx, BCI RE- 123-dbx or RE-11-dbx
POWER SUPPLY
Operating Voltage:>Switchable:100-120 VAC 50-60 Hz or 200-240 VAC 50/60 Hz
Power Consumption:>20 Watts
Fuse:>100-120 VAC:250 mA Slow Blow, 200-240 VAC:125 mA Type T
Mains Connection:>IEC receptacle
PHYSICAL
Dimensions:>1.75"Hx19"Wx9"D (4.4cmx48.3cmx20.1cm)
Weight:>5.2 lbs. (2.4 kg)
Shipping Weight:>7.6 lbs. (3.5 kg)
>Note:Specifications subject to change without notice.